Battery 6N2-2A-8 (L:70mm x H:96mm x W:47mm) (Supplied with acid)The first letter is the manufacturers prefix and may be different to the battery on your bike. Please check with the battery on your bike. All our batteries are supplied either fully sealed or with acid.
ALL BATTERIES MUST BE CHARGED BEFORE USE!
This ensures longevity of battery life!
ACTIVATION
Dry Filled Batteries- Fill battery with supplied acid to upper fill level, leave to settle for ten minutes, check acid levels and replace yellow caps when battery has been charged. Ensure acid level is at the upper fill mark before and after charging.
Gel Filled Batteries- Remove foil seal from the battery and the plastic cap from the acid cartridge. Press the cartridge on to the top of the battery piercing the seals and allow it to drain completely before removing it and pressing the plastic sealing strip firmly on to the top of the battery. The acid will then change to gel over a few hours.
.Sealed Batteries- These batteries come with no acid and are fully sealed they require no action before charging. These batteries should not be opened for any reason.
.CHARGING
New batteries should be charged on a trickle charge for motorcycle batteries (NOT A CAR CHARGER) which should be around 1.4amps per hour for 6 hours before being used on the motorcycle.
.
